South-east Asia Type Plain End Steel Plank is the kind of plank without hook ends, it is a light weight and economical scaffolding plank that made by 1.5mm or 1.2mm thickness of steel plate. The plank shall be fixed to the scaffolding tube or transom by board retainer clamps.
Mesh Ladders / Step Ladders / Steel Ladders / Straight Stairs are the economical stair acesses for H frames. The stair treads are made by 52x26x2.0mm steel oval tube, and the treads are made by mesh plates or punched hole plates or strip plates. They are used for 1219x1930mm H frames or cross lock scaffolding, for 1.83m or 2m scaffold bay.
Kwikstage Stairway (Steel) is the safe & easy solution for vertical access in lightweight with non-slip treads and platform. It is fabricated and designed to fit in a 1.27x2.44m scaffolding bay with 1.5m lift height. It is a specially design to fit in 1.2m tranom for two stairs side by side installation. The stairs are hot dip galvanized.
Steel formwork is a temporary setup for storing concrete until it sets. Formworks are wide used for slabs, walls, beams, columns' concrete casting in building construction. Steel is a perfect material for making formwork because it will never bend or warp while pouring concrete. Steel formwork has the capability to store a large amount of concrete.1
Speed Shore Kwikstage scaffolding is the type of heavy duty kwiskstage system scaffold that used for concrete slab formwork solutions with sleeved standard, C-ledgers, trigger brace, solid adjustable screw jack base , forkhead jacks, rail post etc.
Kwikstage Scaffolding Return transom allows a 90 degree turn in the scaffold and sit over the ledger allowing boards to run at right angles in adjacent bays. It can also be used to change direction. The use of Return Transoms eliminates the " gap " between runs at right angles.
Kwikstage Ladder Access Transom is used where a ladder access or trapdoor is required inside a bay. The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom. To be used with a Safety Trap-Door, a single section verticle ladder is held in place with 4 nos Metal Ladder Clamp. We recommend that 1
Kwikstage Mesh Panel / Brick Guard is placed between the ledger and the steel plank. Designed to be suspended from a guard rail ledger enclosing the space between the ledger and the working platform for safety.
Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes.
Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes. Hop Up Bracket with Post and Spigot allows to install scaffold vertical and ledger for safety railing.
Kwikstage Scaffolding Tie Bars have pins at each ends which fit in holes of 2 and 3 Hop Up Brackets to prevent the brackets spreading and the planks from becoming dislodged.
Kwikstage Internal Corner Board is used to fill in the gap ineternal corners when stage board brackets are used. It is a safe element to fill space between boards and standards to form a safe work platform and leveling. The internal corner boards sizes include one boards, 2 boards, 3 boards according to the width.
Kwikstage Scaffolding Steel Plank is a kind of plank which is designed and fabricated as per the Standard requirement of Australia/New Zealand AS 1577. It is made by 1.8mm or 1.5mm steel plate and hot dip galvanized. The planks are no hooks at both ends and to be installed onto the scaffolding transoms.
Kwikstage Scaffolding Toe Board / Kick Board is the component that prevents the building materials or tools falling off from working platform. The toe board has bolts at the ends to hold itself sitting between two verticals post of the platform.
Toe Board Clip is used to hold the toe baord to the scaffold working platform. The traditional Kwikstage Scafolding toe board clamp is fabricated by 5mm steel plate. And mostly the steel plank is always used the toe board.
European Type Steel Plank is one kind of high safety dedsigned plank for Ring Lock System Scaffolding. It is designed with 320mm wide and wide hooks for tubular ledger (O Ledger). The plank is hot dip galvanized for long lasting use.
South-East Asia Type of Steel Plank is a kind of economical, light weight, good quality scaffolding plank. It is normally used for coupler-tubular scaffolding, it is in 240mm or 210mm wide, and in the length of 0.5m, 1.0m, 1.5m, 1.0m, 1.5m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m.
Steel Plywood formwork is made by steel frame and filmed plywood form, it is a kind of is a pre-engineered, factory-built, reusable in situ concrete forming system. It saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. The only tool required for setup and stripping is a hammer.
