Stringer Stair is a popular stairway for system scaffolding in American market. It is set for 7' scaffold bay length, 6'7" high rising and for 3'6" wide access. The stair stringers and treads can be seperated. It can help to reduce job difficulty of when installing or dismantling the stair. Also it is much more convenient for material storage and t1
Kwikstage System Scaffolding Transom is the component of that for holding the platforms or planks without hooks, it is made by the 50x5mm angle steel and welded two ledger adaptors at two ends. Kwikstage Scaffolding Main Componenets: Vertical (Standard), Horizontal (Ledger), Diagonal Brace (Bay Brace), Transom, Ladder Access Transom, Return T1
Aluminum Ladders are acted as scaffolding access, and popular for home uses, decoration jobs, building and construction, even for industry. Using high-quality, high-strength 6061-T6 aircraft grade aluminum alloy, the ladders are manufactured for extra safety and longer life.
H-Shoring Frame is a knid of traditional shoring scaffolding, it is a kind ladder frame for heavy duty support. It is made from O.D.60x3.5mm or O.D. 60x4.0mm high quality steel tube for frame leg, and O.D. 42x2.2mm tube for frame horizontals.
Aluminum Plywood Ladder Hatch Deck is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 24" or 28", plank length from 7' to 10'. Hatch Ladder: Aluminum 6061-T6, 7-step ladder The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Mesh Ladders / Step Ladders / Steel Ladders / Straight Stairs are the economical stair acesses for H frames. The stair treads are made by 52x26x2.0mm steel oval tube, and the treads are made by mesh plates or punched hole plates or strip plates. They are used for 1219x1930mm H frames or cross lock scaffolding, for 1.83m or 2m scaffold bay.
Kwikstage Scaffolding Return transom allows a 90 degree turn in the scaffold and sit over the ledger allowing boards to run at right angles in adjacent bays. It can also be used to change direction. The use of Return Transoms eliminates the " gap " between runs at right angles.
Kwikstage Ladder Access Transom is used where a ladder access or trapdoor is required inside a bay. The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom. To be used with a Safety Trap-Door, a single section verticle ladder is held in place with 4 nos Metal Ladder Clamp. We recommend that 1
