Shoring Prop is a kind of adjustable vertical pipe suport for concrete formwork suporting, is widely used for building, tunnel, mine construction. The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustments. The casting collar located below the pin gives fine adjustment for leveli1
Australian Kwikstage System Scaffolding vertical post is made by O.D. 48.3mm x 4mm thickness high quality steel tubing which can provides safety and heavy duty support for scaffolding, and complies to AS/NZS 1576 requirements. Kwikstage Scaffolding Main Componenets: Standard (Vertical), Ledger (Horizontal), Diagonal Brace (Bay Brace), Transom, Ladd1
Kwikstage System Scaffolding Ledger is part of scaffolding component used as scaffold runner or transom. It is usually fabricated by O.D 48.3x3.25mm steel tubes and comply with the Standard requiremwnts of AS/NZS 1576 for Australian / New Zealand's market. Kwikstage Scaffolding Main Componenets: Standard, Ledger, Diagonal Brace (Bay Brace), Transom1
Kwikstage System Scaffolding Diagonal Brace, also called bay brace, is a main scaffolding component that gives additional strength to the structure and keep it stable. The brace is made by O.D48.3x2.3mm tube and bolt-jointed the C pressing adaptors with wedge pins at brace ends. It meets the Standard requirements of AS/NZS 1576. Kwikstage Sca1
Kwikstage System Scaffolding Transom is the component of that for holding the platforms or planks without hooks, it is made by the 50x5mm angle steel and welded two ledger adaptors at two ends. Kwikstage Scaffolding Main Componenets: Vertical (Standard), Horizontal (Ledger), Diagonal Brace (Bay Brace), Transom, Ladder Access Transom, Return T1
South Africa Kwikstage Scaffolding is a kind of popular modular scaffolding in SA. The Standards is made from O.D48.3mm x 3.25mm Scaffold Tube with V-lugs. It is Vertical Parts of Kwikstage Modular System. Kwikstage Scaffolding is commonly used for Concrete Formwork Slab Support, also used in Construction and Building. The main components of 1
South Africa Kwikstage Scaffolding is a kind of popular modular scaffolding in SA. The Ledger is made from O.D48.3mm x 2.5mm Scaffold Tube with C-pressing ends and wedge pins. The main components of SA Kwikstage Scaffolding include: Standard, Ledger, Diagonal Brace, Hook-on Plank, Toe Board, Stair or Ladder, Cantilever Bracket, Strip Beam, decking 1
Aluminium Kwikstage system provides a highly flexible and easy to assemble scaffolding system that has been designed along the same lines as the steel Kwikstage range of products.
Aluminium Kwikstage Scaffolding system provides a highly flexible and easy to assemble scaffolding system that has been designed along the same lines as the steel Kwikstage range of products.
Guardrail Posts are set up on top of the scaffolding platform for installing guardrail braces. They provide fall protection to the people when working on the scaffold platform. Guardrail Posts are made by dia.1.65" x 0.09"t (O.D 42x2.3mm) or dia. 1.69"x0.095"t (O.D 43x2.5mm) steel tubes. They are strong engough to hold the guardrail braces.
Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Angle Iron Side Bracket is the kind of bracket made by angle iron, with bell hanger.
Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Tubular Side Bracket is the kind of bracket that made by dia.1.65"x0.09"t (O.D 42x2.3mm) steel tube and with saddle hange1
All aluminum Plank is made by 6061-T6 or 6082-T6 aluminum extrusion, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Aluminum Plywood Plank is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Aluminum Plywood Ladder Hatch Deck is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 24" or 28", plank length from 7' to 10'. Hatch Ladder: Aluminum 6061-T6, 7-step ladder The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Steel plank is used as walkway plank in scaffolding system for construction safety. It is a fitting part of construction scaffolds. There are stamping holes on the scaffolding plank to resist skidding for workers. The galvanized surface and rib reinforcement design makes scaffolding plank more stronger in the rainy days and moist environment.
Amercian Type Steel Plank is the right platform for the scaffolding on which people can stand and work. The main features of the planks are optimum strength, stability, durability and traction. The top surface usually has holes which provide traction as well as serve purpose for the water removal as it shall not clog on it. We manufacture various t1
Steel plank is used as walkway plank in scaffolding system for construction safety. It is a fitting part of construction scaffolds. There are stamping holes on the scaffolding plank to resist skidding for workers. The galvanized surface and rib reinforcement design makes scaffolding plank more stronger in the rainy days and moist environment.1
