Shoring Prop is a kind of adjustable vertical pipe suport for concrete formwork suporting, is widely used for building, tunnel, mine construction. The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustments. The casting collar located below the pin gives fine adjustment for leveli1
Guardrail Posts are set up on top of the scaffolding platform for installing guardrail braces. They provide fall protection to the people when working on the scaffold platform. Guardrail Posts are made by dia.1.65" x 0.09"t (O.D 42x2.3mm) or dia. 1.69"x0.095"t (O.D 43x2.5mm) steel tubes. They are strong engough to hold the guardrail braces.
Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Angle Iron Side Bracket is the kind of bracket made by angle iron, with bell hanger.
Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Tubular Side Bracket is the kind of bracket that made by dia.1.65"x0.09"t (O.D 42x2.3mm) steel tube and with saddle hange1
All aluminum Plank is made by 6061-T6 or 6082-T6 aluminum extrusion, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Aluminum Plywood Plank is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Aluminum Plywood Ladder Hatch Deck is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 24" or 28", plank length from 7' to 10'. Hatch Ladder: Aluminum 6061-T6, 7-step ladder The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Steel plank is used as walkway plank in scaffolding system for construction safety. It is a fitting part of construction scaffolds. There are stamping holes on the scaffolding plank to resist skidding for workers. The galvanized surface and rib reinforcement design makes scaffolding plank more stronger in the rainy days and moist environment.
Amercian Type Steel Plank is the right platform for the scaffolding on which people can stand and work. The main features of the planks are optimum strength, stability, durability and traction. The top surface usually has holes which provide traction as well as serve purpose for the water removal as it shall not clog on it. We manufacture various t1
Steel plank is used as walkway plank in scaffolding system for construction safety. It is a fitting part of construction scaffolds. There are stamping holes on the scaffolding plank to resist skidding for workers. The galvanized surface and rib reinforcement design makes scaffolding plank more stronger in the rainy days and moist environment.1
South-east Asia Type Plain End Steel Plank is the kind of plank without hook ends, it is a light weight and economical scaffolding plank that made by 1.5mm or 1.2mm thickness of steel plate. The plank shall be fixed to the scaffolding tube or transom by board retainer clamps.
Mesh Ladders / Step Ladders / Steel Ladders / Straight Stairs are the economical stair acesses for H frames. The stair treads are made by 52x26x2.0mm steel oval tube, and the treads are made by mesh plates or punched hole plates or strip plates. They are used for 1219x1930mm H frames or cross lock scaffolding, for 1.83m or 2m scaffold bay.
Kwikstage Stairway (Steel) is the safe & easy solution for vertical access in lightweight with non-slip treads and platform. It is fabricated and designed to fit in a 1.27x2.44m scaffolding bay with 1.5m lift height. It is a specially design to fit in 1.2m tranom for two stairs side by side installation. The stairs are hot dip galvanized.
Steel formwork is a temporary setup for storing concrete until it sets. Formworks are wide used for slabs, walls, beams, columns' concrete casting in building construction. Steel is a perfect material for making formwork because it will never bend or warp while pouring concrete. Steel formwork has the capability to store a large amount of concrete.1
Kwikstage Scaffolding Steel Plank is a kind of plank which is designed and fabricated as per the Standard requirement of Australia/New Zealand AS 1577. It is made by 1.8mm or 1.5mm steel plate and hot dip galvanized. The planks are no hooks at both ends and to be installed onto the scaffolding transoms.
Kwikstage Scaffolding Toe Board / Kick Board is the component that prevents the building materials or tools falling off from working platform. The toe board has bolts at the ends to hold itself sitting between two verticals post of the platform.
European Type Steel Plank is one kind of high safety dedsigned plank for Ring Lock System Scaffolding. It is designed with 320mm wide and wide hooks for tubular ledger (O Ledger). The plank is hot dip galvanized for long lasting use.
