Shoring Prop is a kind of adjustable vertical pipe suport for concrete formwork suporting, is widely used for building, tunnel, mine construction. The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustments. The casting collar located below the pin gives fine adjustment for leveli1
Cup Lock Scaffolding Vertical and Horizontal members are fabricated by ø48.3x3.25mm (1.90" O.D x 10 gauge) high strength steel tubes. It is a fully Hot Dip Galvanized multi-purpose steel scaffold system suitable for providing general access and supporting vertical loads. The key feature is its bowl locking point which allows up to 4 horizontals to 1
Cup Lock Scaffolding is fabricated by ø48.3x3.25mm (1.90" O.D x 10 gauge) high strength steel tubes. It is a fully Hot Dip Galvanized multi-purpose steel scaffold system suitable for providing general access and supporting vertical loads. The key feature is its bowl locking point which allows up to 4 horizontals to be connected to a vertical in a s1
Aluminum Ring Lock Scaffolding is the industry standard for modular scaffolding and offers unbeatable durability, simplicity and versatility. Ring Lock is the scaffolding of choice globally for residential building, industrial, construction sites, aircraft building and maintenance, performing arts and large events, and so on.
X-Shoring Frame is a typical shoring scaffolding used in Australia. It is made from high quality steel tube O.D. 60x3.5mm or O.D. 60x.40mm as frame legs, O.D. 42x2.3mm tube as the frame horizontal section, O.D. 28x2.0mm tube as the inside X-section. X-shoring frame offers heavy duty supoort for construction.
Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Angle Iron Side Bracket is the kind of bracket made by angle iron, with bell hanger.
Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Tubular Side Bracket is the kind of bracket that made by dia.1.65"x0.09"t (O.D 42x2.3mm) steel tube and with saddle hange1
End Bracket is the type of extension bracket, used to extend the platform at the end of a scaffold run. The end bracket is also placed at the leg but is perpendicular to the frame or bearer. Tubular End Bracket is made by dia.1.65"x0.09"t (O.D 42x2.3mm) steel tube and with bell hanger or saddle hanger.
Aluminum Plywood Plank is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.
Steel plank is used as walkway plank in scaffolding system for construction safety. It is a fitting part of construction scaffolds. There are stamping holes on the scaffolding plank to resist skidding for workers. The galvanized surface and rib reinforcement design makes scaffolding plank more stronger in the rainy days and moist environment.1
South-east Asia Type Plain End Steel Plank is the kind of plank without hook ends, it is a light weight and economical scaffolding plank that made by 1.5mm or 1.2mm thickness of steel plate. The plank shall be fixed to the scaffolding tube or transom by board retainer clamps.
2.0m Aluminum Stretcher Stairs with Hooks are the type of stretcher stair with long u-shape hook welded at the two ends. By thehooks, the stairs can widely use for all kinds of modular scaffolding system, such as kwikstage, ring lock, cup lock scaffolding. They are pre-fabricated and designed to fit in a 1.27m x 2.44m bay with a 2.0m lift. The1
Scaffolding Couplers are the fittings for fixing and stabilizing the steel tubular scfolding. Simple, orthogonal, sviwel,fixed couplings for worksite barrier, couplings for beams and many other types. We supply various types of BS1139 / EN74 / AS 1576 / ANSI Standard forged or pressed Double Coupler, Swivel Clamp, Beam Clamp Girder, Sleeve Coupler,1
Ring Lock Scaffolding Side bracket is used at the edge of a scaffolding to extend the reach or extension off of any side of the scaffolding where sunshade comes.
Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes.
Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes. Hop Up Bracket with Post and Spigot allows to install scaffold vertical and ledger for safety railing.
Kwikstage Scaffolding Hop Down Bracket / Step Down Bracket gives balance and stability to the bottom step when getting on or off stair access at ground level. The first step onto stair access can be difficult due to site constraints, ground levels and base outs. The use of the step down bracket gives the comfort of adjustment to balance the variabl1
Kwikstage Internal Corner Board is used to fill in the gap ineternal corners when stage board brackets are used. It is a safe element to fill space between boards and standards to form a safe work platform and leveling. The internal corner boards sizes include one boards, 2 boards, 3 boards according to the width.
