Scaffolding Twist Lock Tubes are made from Hot Dip Galvanized Steel and meet OSHA and ANSI requirements. Tube-Lock is designed for the construction of independent scaffolds and can also be used in industry, shipbuilding and the aircraft industry.
Scaffolding Casters are the important components both for steel and alumnium scaffolding, they provide movable, convenient and safe load capacity for mobile scaffolding towers.
Sidewalk Shed is a structure constructed to protect pedestrians from objects falling from a building or construction site. Sidewalk Bridge is required when construction work is over 40 feet high or 25 feet high for demolition work and whenever there is a dangerous condition irrespective of the height. A sidewalk shed must be erected whenever materi1
Multi-functional Scaffolding, also called Baker Scaffold, is a kind of light weight mobile scaffold for home uses, in-house plastering, decoration, electrician working. The scaffold can be flexibly adjusted in different working height, and can be moved and stored easily. It is usually to be powder coated in yellow colour.
Steel formwork is a temporary setup for storing concrete until it sets. Formworks are wide used for slabs, walls, beams, columns' concrete casting in building construction. Steel is a perfect material for making formwork because it will never bend or warp while pouring concrete. Steel formwork has the capability to store a large amount of concrete.1
Shuangma Self Climbing Scaffolding Systems is suitable for high-rise buildings and super high-rise shear wall structures. This system integrated with the climbing mechanism makes for one-time installation and lifting. Also its built-in safety screen design can effectively prevent workers and objects falling when operating.
Ring Lock Scaffolding Side bracket is used at the edge of a scaffolding to extend the reach or extension off of any side of the scaffolding where sunshade comes.
Ring Lock Scaffolding Lattice Beams are the horizontal members that allow for scaffolding over large spans or gaps, offers suspended, walk through and beam support in Construction. Sizes of the Lattice Beams are in 10 ft to 28 ft according to construction design and 500mm depth.
Ring Lock Scafolding Double ledgers are horizontal members ing that allow for increased load carrying capacities not possible with single tube or regular duty ledgers. They provide increased horizontal support for loads and planks.
Speed Shore Kwikstage scaffolding is the type of heavy duty kwiskstage system scaffold that used for concrete slab formwork solutions with sleeved standard, C-ledgers, trigger brace, solid adjustable screw jack base , forkhead jacks, rail post etc.
Kwikstage Scaffolding Return transom allows a 90 degree turn in the scaffold and sit over the ledger allowing boards to run at right angles in adjacent bays. It can also be used to change direction. The use of Return Transoms eliminates the " gap " between runs at right angles.
Kwikstage Ladder Access Transom is used where a ladder access or trapdoor is required inside a bay. The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom. To be used with a Safety Trap-Door, a single section verticle ladder is held in place with 4 nos Metal Ladder Clamp. We recommend that 1
Kwikstage Mesh Panel / Brick Guard is placed between the ledger and the steel plank. Designed to be suspended from a guard rail ledger enclosing the space between the ledger and the working platform for safety.
Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes.
Kwikstage Scaffolding Hop Down Bracket / Step Down Bracket gives balance and stability to the bottom step when getting on or off stair access at ground level. The first step onto stair access can be difficult due to site constraints, ground levels and base outs. The use of the step down bracket gives the comfort of adjustment to balance the variabl1
Kwikstage Scaffolding Tie Bars have pins at each ends which fit in holes of 2 and 3 Hop Up Brackets to prevent the brackets spreading and the planks from becoming dislodged.
Kwikstage Internal Corner Board is used to fill in the gap ineternal corners when stage board brackets are used. It is a safe element to fill space between boards and standards to form a safe work platform and leveling. The internal corner boards sizes include one boards, 2 boards, 3 boards according to the width.
