Kwikstage Scaffolding Tie Bars have pins at each ends which fit in holes of 2 and 3 Hop Up Brackets to prevent the brackets spreading and the planks from becoming dislodged.
Kwikstage Internal Corner Board is used to fill in the gap ineternal corners when stage board brackets are used. It is a safe element to fill space between boards and standards to form a safe work platform and leveling. The internal corner boards sizes include one boards, 2 boards, 3 boards according to the width.
Kwikstage Scaffolding Steel Plank is a kind of plank which is designed and fabricated as per the Standard requirement of Australia/New Zealand AS 1577. It is made by 1.8mm or 1.5mm steel plate and hot dip galvanized. The planks are no hooks at both ends and to be installed onto the scaffolding transoms.
Kwikstage Scaffolding Toe Board / Kick Board is the component that prevents the building materials or tools falling off from working platform. The toe board has bolts at the ends to hold itself sitting between two verticals post of the platform.
Toe Board Clip is used to hold the toe baord to the scaffold working platform. The traditional Kwikstage Scafolding toe board clamp is fabricated by 5mm steel plate. And mostly the steel plank is always used the toe board.
European Type Steel Plank is one kind of high safety dedsigned plank for Ring Lock System Scaffolding. It is designed with 320mm wide and wide hooks for tubular ledger (O Ledger). The plank is hot dip galvanized for long lasting use.
South-East Asia Type of Steel Plank is a kind of economical, light weight, good quality scaffolding plank. It is normally used for coupler-tubular scaffolding, it is in 240mm or 210mm wide, and in the length of 0.5m, 1.0m, 1.5m, 1.0m, 1.5m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m.
Steel Plywood formwork is made by steel frame and filmed plywood form, it is a kind of is a pre-engineered, factory-built, reusable in situ concrete forming system. It saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. The only tool required for setup and stripping is a hammer.
German Type Ringlock Scaffolding,also called Allround scaffolding, typical product layher scaffolding, is one of the most popular system scaffolding or modular scaffolding for construction. It is widely used in the construction industry, such as building, bridge, viaduct, petrochemical, shipyard, aircraft maintenance, etc. It supports to access wor1
Ring Lock Scaffolding Diagonal Braces, also called Bay Braces or Vertical Braces, serve to give lateral support to the scaffold. They can also be used as guard rails in stair system, or tension and compression members. It is made from O.D 48.3x2.5mm scaffold tube with cast steel brace head and wedge pins at both ends.
Ring Lock Scaffolding Level Brace, also called Plain Brace, is main component of system scaffolding which use as diagonal ledger. It is used in the large bay mobile scaffolding tower and gives additional strength to the tower structure and keep the tower stable.
American Type Ringlock Scaffolding, typical product is Safway system scaffolding, is the most popular modular system scaffolding for construction. It is widely used in the construction industry, such as building, bridge, viaduct, petrochemical, shipyard, power plant, aircraft maintenance, etc. It supports to access work and platform as a temporary 1
Acrow Prop is a kind of single post heavy duty steel props for construction. It is simple and innovative design, fabricated with high yield steel tube to varies specifications, permits versatility across a multitude of uses, including falsework support, as raking shores, and as temporary support.
Nested Lock Scaffolding is composed of vertical post, horizontal ledger, diagonal brace, screw jack, base jack and other components. The vertical is connected by a sleeve socket, and there are pressed steel nested buckle sockets welded on the vertical tube. The Ledger has two end joints. When installing scaffolding, the end joints are ins1
Nested Lock Ledger: A specially designed end joint plug is welded on both ends of the ledger pipe, and the outer semicircle is consistent with the radian of the vertical pipe. The common sizes of ledgers 1800mm, 1500mm, 1200mm, 900mm, 600mm.
