Kwikstage Ladder Access Transom is used where a ladder access or trapdoor is required inside a bay. The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom. To be used with a Safety Trap-Door, a single section verticle ladder is held in place with 4 nos Metal Ladder Clamp. We recommend that 1
Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes. Hop Up Bracket with Post and Spigot allows to install scaffold vertical and ledger for safety railing.
Kwikstage Scaffolding Hop Down Bracket / Step Down Bracket gives balance and stability to the bottom step when getting on or off stair access at ground level. The first step onto stair access can be difficult due to site constraints, ground levels and base outs. The use of the step down bracket gives the comfort of adjustment to balance the variabl1
European Type Steel Plank is one kind of high safety dedsigned plank for Ring Lock System Scaffolding. It is designed with 320mm wide and wide hooks for tubular ledger (O Ledger). The plank is hot dip galvanized for long lasting use.
Steel Plywood formwork is made by steel frame and filmed plywood form, it is a kind of is a pre-engineered, factory-built, reusable in situ concrete forming system. It saves time because it is easy to set up and strip. No measuring, sawing, drilling, or nailing is required. The only tool required for setup and stripping is a hammer.
German Type Ringlock Scaffolding,also called Allround scaffolding, typical product layher scaffolding, is one of the most popular system scaffolding or modular scaffolding for construction. It is widely used in the construction industry, such as building, bridge, viaduct, petrochemical, shipyard, aircraft maintenance, etc. It supports to access wor1
Acrow Prop is a kind of single post heavy duty steel props for construction. It is simple and innovative design, fabricated with high yield steel tube to varies specifications, permits versatility across a multitude of uses, including falsework support, as raking shores, and as temporary support.
Nested Lock Scaffolding is composed of vertical post, horizontal ledger, diagonal brace, screw jack, base jack and other components. The vertical is connected by a sleeve socket, and there are pressed steel nested buckle sockets welded on the vertical tube. The Ledger has two end joints. When installing scaffolding, the end joints are ins1
